Home

Proftpd VirtualHost

ProFTPD: Virtual Servers. What is a virtual server? A virtual server, also known as a virtual host (or vhostfor short),refers to the practice of serving more than one address/site on a single hostmachine. The fact that these multiple sites are being served by the samephysical machine is transparent to the end user ProFTPd is a popular FTP server that can be configured to use the SFTP protocol, a secure FTP alternative, instead of FTP. This article will show you how to configure ProFTPd to use this protocol to avoid the insecurity of FTP. All our virtual users will have the same UID which correspond to www-data system username Proftpd - Virtualhost and TLS. 0. I am trying to setup a Proftpd server (version 1.3.6 on CentOS 8) that works this way: User accesses the server on port 21 and IP or DNS name ftp .xyze.com: use plain FTP However, ProFTPD's configuration file syntax does not have a context/section that says these directives are just for the entire daemon. Thus by default (and yes, it's not ideal), these daemon-wide directives are only allowed in the server config section, outside of <Global>, <VirtualHost>, or any other context

ProFTPD: Virtual Server

Ich habe bereits die Suchfunktion verwendet, konnte aber keine Antwort auf meine (blöde?) Frage finden... Also: Ich habe hier ein SuSE 6.4 und lasse seit heute proFTPd darauf laufen. Ich habe bereits auf dem Server einen Apache mit VirtualHosts laufen und möchte auf diese nun über den proFTPd »richtig« zugreifen. Also der VH vom Apache soll auch gleich dem VH vom proFTPd sein Mit dieser Anleitung wird ProFTPD so eingestellt das er mit virtuelle Usern benutzt werden kann und die Verzeichnisse angegeben werden können in welchen diese User nutzen dürfen. Installation von ProFTP. apt-get install proftpd. Um die Virtuellen User anzulegen verwende ich dieses Perl script (ftpasswd) ProFTPD: Virtual Users. The core proftpddaemon access all user information viaan Auth API. This API hides all of the details of where user informationis stored, how to retrieve it, etcfrom the core engine and modules. This abstraction allows for multiple simultaneous different authenticationlayers or mechanisms to be configured ServerNameProFTPDServerTypeinetd# Port 21 is the standard FTP port. Port21# Global creates a global configuration that is shared by the# main server and all virtualhosts. # Umask 022 is a good standard umask to prevent new dirs and files # from being group and world writable. Umask022# Set the user and group that the. Allow ALL. Thats interesting and you;re address is already being used by ISPConfig, you just need to allow the permissions /etc/proftpd_ [IP_ADDRESS].conf <--- adds the included file. http://www.howtoforge.com/forums/showthread.php?t=518

ProFTPD is a high-performance, extremely configurable, and most of all a secure FTP server, featuring Apache-like configuration and blazing performance. ProFTPD Highly configurable GPL-licensed FTP server softwar Ein VirtualHost beim ProFTPD ist so zu verstehen: man kann den Server auf mehreren IP's/Ports gleichzeitig laufen lassen und ein User kann (per Default) sich auf allen mit ein und dem selben Usernamen und Passwort anmelden - damit kann man die einzelnen Adressen des ProFTPD auch wie virtuelle Hosts betrachten - allerdings gänzlich anders, wie bei Apache und Konsorten. Ich war jetzt sehr. Virtual users are defined as FTP-only user accounts. These users to proftpd, but who are separated from the normal system users, and who do not have entries in /etc/passwd. Here the user data was fetched via a name, a UID, a GID, a home directory, and a shell. We helped the customers in configuring ProFTPd with virtual users by following. To configure ProFTPD, create a Virtual Host container. To do this, perform the following steps as the root user: Open the /etc/proftpd.conf file with a text editor and add the following lines after the comments Now we create a database called ftp and a MySQL user named proftpd which the proftpd daemon will use later on to connect to the ftp database: mysql -u root -p CREATE DATABASE ftp; GRANT SELECT, INSERT, UPDATE, DELETE ON ftp.* TO 'proftpd'@'localhost' IDENTIFIED BY 'password'; GRANT SELECT, INSERT, UPDATE, DELETE ON ftp.* TO 'proftpd'@'localhost.localdomain' IDENTIFIED BY 'password'

ProFTPd Server with virtual users and in SFTP mode

It seems proftpd don't use Virtualhost tag maybe because of the SFTP tag...or not. I putted the Vhost tag between SFTP tag or SFTP tag between Vhost tag but this is the same behaviour Description. FIXME FIXME FIXME. See also. Prev: Home: Next Global: Up Anonymou PROFTPD - SFTP CONFIGURATION. GitHub Gist: instantly share code, notes, and snippets. Skip to content. All gists Back to GitHub. Sign in Sign up Instantly share code, notes, and snippets. tuxfight3r / proftpd.conf. Created Jan 12, 2015. Star 0 Fork 0; Code Revisions 1. Embed. What would you like to do? Embed Embed this gist in your website. Share Copy sharable link for this gist. Clone via. Hi, ich versuche auf meinem v-server ProFTPD aus den Repos mit virtuellen Benutzern einzurichten. Dabei bin ich nach der Anleitung im Wiki vorgegangen. In der Datei /etc/proftpd/proftpd.conf wurden DefaultRoot usw eingetragen - hier mal meine komplette Config Ich kaue nun schon eine ganze Weile am Problem herum, dass mit proftpd (Version 1.3.3e) die Angaben von Umask unter <Directory> ignoriert und nur die aus der übergeordneten <VirtualHost> annimmt. Anbei ein Auszug aus der Konfig

Proftpd - Virtualhost and TLS - Server Faul

  1. Code: Alles auswählen 2020-03-29 16:49:12,199 mirror proftpd[19697] XXX.fritz.box (ip-XX-XX-XX-XX.hsi03.unitymediagroup.de[XX-XX-XX-XX]): FTP session opened. 2020-03-29 16:49:12,228 mirror proftpd[19697] XXX.fritz.box (ip-XX-XX-XX-XX.hsi03.unitymediagroup.de[XX-XX-XX-XX]): USER theunknown (Login failed): Incorrect password 2020-03-29 16:49:12,237 mirror proftpd[19697] XXX.fritz.box (ip-XX-XX.
  2. Before I added the <VirtualHost> sections, when I started proftpd, the banner looked like this: Code: localhost.localdomain proftpd[26738] 0.0.0.0: 0.0.0.0:21 masquerading as 192.168..82 I can make successful FTP connections on the WLAN/public IP, when the MasqueradeAddress directive appears in the Server Config section, but the LAN/private IP doesn't work. After adding the <VirtualHost.
  3. Der ProFTPD-Server ignoriert die Zeile dann komplett, weshalb diese Notation auch eine weitere Option darstellt, um Funktionen zu deaktivieren. Hauptsächlich dient das Rautezeichen aber dazu, Kommentare zu den verschiedenen Einstellungsmöglichkeiten zu machen, um die Lesbarkeit der proftpd.conf zu verbessern
  4. Plesk / Proftpd / Nat-Virtualbox. Thread starter biertragl; Start date Apr 24, 2016; B. biertragl Member. Apr 24, 2016 #1 Servus. Habe folgendes Problem: Habe Windows Server 2012 Standard r2 als Hostsystem, darauf installiert eine Virtualbox mit Debian 8.4 als Gast (ich kann nur NAT-Netzwerk machen, da nur 1x IP-Adresse vorhanden :-( ). Dort ist Plesk installiert und es läuft auch alles.
  5. Subject: AW: [Proftpd-user] VirtualHost not working. Post by Andreas Bachmann Hi Laban! ### 2 Domains - 1 IP ### Do support for FTP... ### 2 Domains - 2 IP ### Edit /etc/resolv Greets Bachi-----Ursprüngliche Nachricht-----Gesendet: Sonntag, 25. August 2002 19:52 An: ProFTPd List Betreff: [Proftpd-user] VirtualHost not working I've tried to get my machine to work as two servers with.
  6. Dann können Sie nach der Anmeldung FTP Server mit ProFTPD hier bearbeiten. Mitarbeiter. Benutzer gelöscht. hat keine Beschreibung angegeben. Eine Beschreibung kann man unter dem Punkt Profil bearbeiten im Kontrollzentrum eintragen. Benutzer gelöscht. hat keine Beschreibung angegeben. Eine Beschreibung kann man unter dem Punkt Profil bearbeiten im Kontrollzentrum eintragen. branleb.

linux - Proftpd - using virtualhosts, global section

  1. ProFTPD Server Software Mailing Lists Brought to you by: castaglia , cyberrobo , droesen , stonk
  2. d sharing an opinion
  3. It worked, here it is (I don't know how to stop Github from putting in nations' flag icons for some character combinations): main1@system1:~$ openssl x509 -noout -text < /tmp/cert.pe

See the Top 10 Web Hosting. Get Instant Recommendations & Trusted Reviews! Compare the Top Web Hosting and Find the One That's Best for You 2 Install Proftpd With MySQL support. For Debian there is a pre-configured proftpd-mysql package available. Install it as a standalone daemon like this: apt-get install proftpd-mysql. Run proftpd from inetd or standalone? <-- standalone. Then we create an ftp group (ftpgroup) and user (ftpuser) that all ou The important columns are these (the others are handled by MySQL or Proftpd automatically, so do not fill these manually!): name: The name of the virtual Proftpd user (e.g. exampleuser). quota_type: user or group. Normally, we use user here. per_session: true or false. true means the quota limits are valid only for a session. For example, if the user has a quota of 15 MB, and he has uploaded 15 MB during the current session, then he cannot upload anything more. But if he logs out and in. hi ich habe root zugriff auf einen server und möchte dort einem bestimmten user in ein verzeichniss einsperren, aber nicht in das home verzeichniss dass er als standard zugewiesen bekommen hatte. auf dem server laufen mehrere virtuelle server und ich weiß nicht, wie und wo (in welcher proftpd.conf) ich das einstellen muss. eine config liegt ganz normal in: etc/proftpd.conf und eine weitere. proftpd virtualhost. From what I understand, the <VirtualHost> directive in the proftpd.conf file can either be a dns name, or ip, but that every <VirtualHost> tag must have a separate ip address to function correctly. I was looking for something similar to apache's VirtualHost directive, which delivers pages for multiple domain names from the same ip address and port. Is this possible with.

proFTPd => VirtualHos

  1. I am trying to configure proftpd 1.3.5b. What I would like to achieve is simple: only one VirtualHost, users will log in based on AuthUserFile and not based on /etc/passwd. The problem is that all the authentication related configuration inside a VirtualHost is being ignored (although the VirtualHost is being loaded successfully). Here is my.
  2. Subject: [Proftpd-user] VirtualHost and PassivePorts Hi all, I've got a somewhat aggrivating problem, here, that I *hope* is a fairly simple configuration issue. ProFTPd 1.2.4 is behind our firewall. On the firewall (FreeBSD ipfw), I have the following rules which apply to FTP hosts: 01000 allow tcp from any to any established 02000 allow tcp from ${network} to any setup 09950 allow tcp from.
  3. [Proftpd-user] Virtual hosts (too old to reply) HomeNet NW 2006-10-24 21:48:24 UTC. Permalink--=====2011101524== Content-Type: multipart/alternative; boundary=0-2126497585-1161726425=:35928 Content-Transfer-Encoding: 8bit---2126497585-1161726425=:35928 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Hi. I am setting up ProFTP for the first time. I am hosting.
  4. This can be verified with the following steps: Connect to the server via SSH. The public IP address is added as MasqueradeAddress in the FTP VirtualHost section: # cat /etc/proftpd.d/50-plesk.conf. <VirtualHost 192.0.2.2>. MasqueradeAddress 203.0.113.2. </VirtualHost>

[Proftpd-user] new to proftpd/ virtualhost (too old to reply) Blair Campbell 2002-10-30 11:17:03 UTC. Permalink. I have set up my proftp.conf file using webmin. I have a handfull of domains on my server and want to have ftp access to most of them. Proftpd is working but I can not get more than one virtualhost to work. I understand there is some issues about this topic and the inherint limits. Hallo . Bei mir lässt sich irgendwie nicht proftpd neu starten bzw. starten, wie mir gerade aufgefallen ist . Erhalte mit dem Befeh <VirtualHost 0.0.0.0> SFTPEngine on SFTPLog /var/log/proftpd/sftp.log # Configure the server to listen on 2222 (openssh owns 22) Port 2222 # Configure the RSA and ECDSA host keys, using the same host key # files that OpenSSH uses. SFTPHostKey /etc/proftpd/ssh_host_rsa_key SFTPHostKey /etc/proftpd/ssh_host_ecdsa_ke

ProFTPD mit virtual User und separaten Verzeichnissen

Die Oberfläche mit dem Namen gadmin-proftpd unterstützt Sie dabei, Ihren Debian-FTP-Server zu starten, Nutzer-Profile anzulegen oder Änderungen in der proftpd.conf vorzunehmen. Letzteres funktioniert, ohne dass Sie die Konfigurationsdatei dafür öffnen müssen - neue oder veränderte Einträge werden automatisch in diese übertragen # # /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file. # To really apply changes, reload proftpd after modifications, if # it runs in daemon mode. It is not required in inetd/xinetd mode. # # Includes DSO modules Include /etc/proftpd/modules.conf # Set off to disable IPv6 support which is annoying on IPv4 only boxes. UseIPv6 on # If set on you can experience a longer connection delay in many cases. IdentLookups off ServerName MiRROR-FTP ServerType standalone # Set to.

Virtual Hosting With Proftpd And MySQL (Incl. Quota) On Fedora 9. Version 1.0 Author: Falko Timme . This document describes how to install a Proftpd server that uses virtual users from a MySQL database instead of real system users. This is much more performant and allows to have thousands of ftp users on a single machine. In addition to that I. PorFTPD Passwort Virtual User ändern Aktuell gibt es im Wiki ca. 380 Artikel, die nur für Xenial getestet sind. Dies entspricht ca. 4,8 % aller Wikiartikel

ProFTPD: Virtual User

The ProFTPD Project: Hom

proftpd virtual host not working Howtoforge - Linux

context: server config,virtualhost,global,directory; module: mod_clamav; compatibility: 0.13rc3; The ClamStream directive will enable the streaming of the uploaded file contents to the Clamd server using the INSTREAM protocol. This directive should be used when the Clamd server is on a different host than the ProFTPd server. If no ClamStream directive is configured, then the module will use the SCAN Clamd protocol I installed ProFTPD with mod-shaper and everything worked out as it should. But when I add a VirtualHost, only the main server gets shaped. The VirtualHost gets to upload and download at full speed... I use this basic configuration for the VirtualHost: <VirtualHost mydomain.com> Port 2022 <Limit ALL> AllowUser usera DenyAll </Limit> (07) ProFTPD over SSL/TLS (08) Pure-FTPd over SSL/TLS; MAIL Server (01) Install Postfix (02) Install Dovecot (03) Add Mail Accounts (OS User) (04) Mail Client's Settings (05) Add Mail Accounts (Virtual User) (06) SSL/TLS Settings (07) Virtual Domain (08) Postfix + Clamav + Amavisd (09) Log Report : pflogsumm; Samba Server (01) Fully accessed. Covers the version naming convention used for ProFTPD releases. On <VirtualHost> sections Covers how to configure virtual servers, listening on only one IP address, and how the daemon handles client connections to its virtual servers On virtual user

The ProFTPD Project: Example Configuration

VirtualHost - forums

small rest api written in python to administer proftpd virtual users via ftpasswd. api proftpd rest rest-api ftp python3 Updated Jul 31, 2018; Python; oliguo / Server-Proftpd-Permissions Star 0 Code Issues Pull requests The document how it works on permission part during setting up FTP user by Proftpd . proftpd Updated Sep 16, 2020; adrianlois / rpi-proftpd-samba-apache2-nginx Star 0 Code. Meine /etc/proftpd sieht so aus: <VirtualHost XXX.XXX.XXX.XXX> RequireValidShell off <Limit LOGIN> DenyGroup !ftpusers </Limit> DefaultRoot ~/anon-ftp AnonymousGroup ftpusers <Directory ~/anon-ftp> <Limit MKD RMD XMKD XRMD> DenyAll </Limit> </Directory> <Directory ~/anon-ftp/incoming> <Limit STOR MKD RMD XMKD XRMD> AllowAll </Limit> </Directory> </VirtualHost> Leider kann ich unter dieser. Oh no! Some styles failed to load. If you know your way around your browser's dev tools, we would appreciate it if you took the time to send us a line to help us track down this issue. Thank You ! We really appreciate your help! - The SourceForge Tea Proftpd: virtual users access via SFTP with ssh keys config. Ask Question Asked 3 years, 10 months ago. Active 3 years, 10 months ago. Viewed 1k times 2. I'm try to configure proftpd for use with SFTP and use with virtual users, but after try several ways it not works with virtual users. Only works for system users . Some config relative to problem below, and here full proftpd.conf. The ProFTPD is started by the xinetd every time the server receives an FTP request. In the case of authorized access, the FTP service is started on behalf of the user whose request is to be processed. For anonymous users, the service is started with the UID of the psaftp user. FTP Users. The FTP server allows for document access of authenticated users that are listed in the /etc/passwd and.

ProFTPD create user : How to add a new user

proftpd -V Compile-time Settings: Version: 1.3.5e (maint) Platform: LINUX [Linux 5.3.-7648-generic x86_64] Built: Mon Feb 5 2018 23:27:47 UTC Built With: configure '--build=x86_64-linux-gnu' '--includedir=${prefix}/include' '--mandir=${prefix}/share/man' '--infodir=${prefix}/share/info' '--sysconfdir=/etc' '--localstatedir=/var' '--disable-silent-rules' '--libdir=${prefix}/lib/x86_64-linux-gnu' '--libexecdir=${prefix}/lib/x86_64-linux-gnu' '--disable-maintainer-mode' '--disable-dependency. multiple <VirtualHost> sections in proftpd.conf. - Bug 3791 - Invalid handling of SCP control messages fragmented over multiple: SSH packets. - Bug 3794 - Cygwin build failure in lib/tpl.c due to wrong include of mman.h. - Bug 3795 - ProFTPD needs to use -pthread linker option if linking against: OpenSSL with thread support

# # /etc/proftpd.conf -- Masquerade avec Virtual Host Local . # ServerType standalone MultilineRFC2228 on # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to. [prev in list] [next in list] [prev in thread] [next in thread] List: proftpd-users Subject: [Proftpd-user] VirtualHost definitions From: Nikolaos Milas <nmilas noa ! gr> Date: 2012-05-01 9:18:51 Message-ID: 4F9FAA7B.2030200 noa ! gr [Download RAW message or body] Hi, I have in my server config (full config is available in my first message to.

ProFTPD has support for IPv6 connections enabled by default. To disable IPv6 functionality at build time, use the proper and <VirtualHost> directives can take both IP addresses and DNS names as parameters. If IP addresses are used, either IPv4 or IPv6, they work as one expects. Things are more involved when a DNS name is given as a parameter. It is possible for a DNS name to have multiple. In folgendem Tutorial zeige ich euch wie ihr einen FTP-Server auf eurem Raspberry Pi installiert.Raspberry Pi als Webserver Tutorials:1. SSH Zugang auf dem Raspberry Pi einrichten 2. Raspberry Pi als Webserver - Apache 2 Installation 3. Raspberry Pi al Hallo, ich habe proftpd bei mir eingerichtet und eig. hat auch alles soweit funktioniert nur kann ich keine Unterordner umbenennen. Meine ProFTPD.conf ist unverändert und sieht aktuell so aus.

Cara Setting Anonymous FTP Debian 9 Dengan Proftpd - Zona TKJ

All of this means that whenever proftpd is given a DNS name, it will resolve that DNS name to its IP address, and then use the IP address. When are DNS Names Resolved? When proftpd starts up and parses its configuration file, it expects to handle DNS names in the following configuration directives, if they are present: Allow DefaultAddress Deny From MasqueradeAddress <VirtualHost> Note that if. Using ProFTPD and its SQL module for MySQL, it is possible to give FTP access to non system users. By doing so, one can give access to a Virtual User which is only allowed to use the FTP service. This Tutorial will show how to create and populate the user and group tables as well as configure proftpd in order to use the MySQL backend

This document describes how to install a Proftpd server that uses virtual users from a MySQL database instead of real system users. This is much more performant and allows to have thousands of ftp users on a single machine. In addition to that I will show the use of quota with this setup. This tutorial is based on Ubuntu 12.10. For the administration of the MySQL database you can use web based. ProFTPD to run on only those two IPs (no grabbing every IP on the server). I also wanted to make the configuration read as clearly as possible, by putting the very different configurations for each site into separate <VirtualHost> sections. And so I wanted to use *only* two <VirtualHost> sections and omit/discard/disable the server context. I have found what works, but I can't see where it is. ProFTPD and VirtualHost problems User Name: Remember Me? Password: Linux - Software This forum is for Software issues. Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum. Notices: Welcome to LinuxQuestions.org, a friendly and active Linux Community. You are currently viewing LQ as a guest. By joining our community you.

Graham Ashton wrote: > is it possible to do name based virtual hosting with proftpd? > > the documentation on the web site suggests not, and that you need to do > IP address based virtual hosting instead. :( Name-based virtual hosting in Apache is done by reading the headers of a HTTP request: GET /path/to/file.html HTTP/1.0 Host: www.virtualhost.com [more headers] Apache uses the Host header. You can search for this topic on the new forum: Search for A ProFTPd virtual server with the same IP address already exists on the new forum. Home; Forums; Support; Help! (Home for newbies) A ProFTPd virtual server with the same IP address already exists; A ProFTPd virtual server with the same IP address already exists . 8 posts / 0 new . Topic locked. Last post #1 Tue, 02/23/2010 - 18:26. at. Now, i have a froxlor install with proftpd conecting to mysql for it's virtual user/group ids. Apache works with www-data:www-data. Php works with apache's mod_php5. Connecting through ftp with a virtual user works, i can upload files, delete them, etc and they are set with permissions as expected (eg: uid 10045 guid 10045 Unlike Apache, ProFTPD does not support name-based virtual servers because there is no provision in the FTP protocol for them. Clients never tell the server the hostname that they are connecting to, so the FTP server can only use the IP address that a connection was received on to determine which virtual server the client wants. When your system receives an FTP connection, ProFTPD will compare.

proftpd config - virtual directory's.. I'm trying to set up my server to allow multiple users to ftp into only thier respective directory's and I'm a bit confused on how to setup proftpd for that. From what I'm reading if I set the directive DefaultRoot ~ this will jail the users into their directory's, exactly what I want Note that with the advent of RFC 7151, FTP now has a HOST command for supporting true name-based virtual hosts, just as the Host header does for HTTP 1.1. And ProFTPD implements this HOST command as of the 1.3.6rc1 release. To use it, you can either simply use DNS names in your <VirtualHost> section, like so Ich bin völlig neu auf dem ProFTPd-Server und kann wirklich nicht herausfinden, wie ich das konfigurieren muss, was ich brauche. Ich hätte gerne ein paar Erklärungen zu den Regeln für virtuelle Server und für Verzeichnisse. Ich verwende Debian Debian Linux 6.0.7 (Squeeze) und ProFTPd Version 1.33. Was ich brauche ist, dass 2 verschiedene Benutzer (sagen wir ftpuser1 und ftpuser2, die ich.

Tutorial Web Server,SubDomain, Dan Ftp Debian9Servidor FTP bajo un host virtual basado en IPKonfigurasi FTP Dengan Web Based net2ftp - Rizky Aji오리알이다slc66crablog

Ich gehe hier nur auf Proftpd ein, da dieser fuer diese Zwecke am geeignetsten ist. Hardware. Es kommt immer darauf an, welche Anforderungen man stellt bzw. welche Anforderungen der Server erfuellen soll. Bei der Planung sollte man folgende Hauptkriterien beruecksichtigen. Die Anzahl der gleichzeitig moeglichen Sessions Ermöglichung von tar und compress on the fly Und den Plattenplatzbedarf. So, I'm running proFTPD (should be the newest one from www.webmin.com)(with webmin1.760),on Ubuntu 14.04.3 LTS Server (32-bit). With the admin username and password, I can use FileZilla to access. Therefore we create a new virtual user with access to a specified path. For this purpose we first change once the directory. cd /etc/proftpd/ Here, the virtual user will be created. In the following example I create the user tutorials with home directory /var/www/. You can specify whatever directory you want (also the absolute root directory or a directory on a mounted external hdd. [Proftpd-user] Wildcard support for virtual hosts? (too old to reply) David Ordal 2009-03-13 05:27:27 UTC. Permalink. Anybody know if it's possible to have wildcards in <VirtualHost> directives? So something like <VirtualHost *> instead of <VirtualHost 1.2.3.4>, which would then bind to any IP address on the machine? I have multiple servers running proftpd, and am trying to make a unified.

  • Reise Kaffeemaschine Media Markt.
  • Uni Paderborn Hörsäle.
  • Benzisothiazol Gesundheit.
  • Tankstellen Preisänderung Uhrzeit.
  • Umbrella Deutsch.
  • Polizei Holzminden Telefonnummer.
  • Craftbukkit.
  • Sand Geräusch HWS.
  • Abi Ofarim Lieder.
  • Horde frankfurt.
  • Winkler Aschau Michelin.
  • Elternschule Film WDR.
  • Wem die Stunde schlägt Englisch.
  • Samsung Galaxy S7 Edge gebraucht mit Garantie.
  • Wasser Druckminderer Filter reinigen.
  • Challenges of The world bank.
  • Ally Brooke.
  • Erdgeschosswohnung Itzehoe.
  • Designer Schuhe Online Shop.
  • Change Management Beispiele pdf.
  • Pubertät ständig gereizt.
  • T Shirts Coole Prints.
  • Libre Office Calc Tabelle drucken.
  • Alabama Geschwister heiraten.
  • Getting.
  • Kühlschrank extra schmal.
  • Red Cedar Schindeln.
  • Elena von Avalor Staffel 3 Deutschland.
  • PES 2020 PC Download.
  • Rammstein Deutschland Gitarre.
  • Mittelalterliche Namen Fantasy.
  • Doktorarbeit Medizin TUM.
  • Deswegen Kreuzworträtsel.
  • Samuel Sachs.
  • 1 72 als Mann.
  • GRÜN Software AG Erfahrung.
  • Stuntwerk Köln Ninja Warrior.
  • Primärliteratur erkennen.
  • Fondshandel Direkt Erfahrungen.
  • MSR Guardian Mini.
  • Dragon City Alte Welt Drachen züchten.